.CW7xESJW_ZelhNM.webp)
.1hEstgKE_ZeGjYT.webp)
.DlfISGdI_18nnXU.webp)
.CkNa3pj6_Z1eT6UD.webp)
1/4
SH Hinge Type Manual
The entry bandsaw. Lift and clamp by hand.
- Capacity
- 200 to 450 mm
- Automation
- Manual
- Sizes
- 4 to configure
Configure
Double Column — LMSA
LMSA Double Column Semi-Automatic
Two columns instead of a hinge. Where the sections get heavy.
.LHOccUJO_ZMYKtY.webp)
1/6
1/4
.dSrnzFjF_i2d3p.webp)
.B_21Ig7p_2li2pO.webp)
.DTn5B_i9_2vvDvK.webp)
1/6
1/6
1/4
1/4
1/4
1/4
- Capacity
- 200 to 1000x300 mm
- Automation
- Semi-automatic
- Lead time
- 1 to 8 weeks As per model Selection
Cutting capacity
9 builtThe largest round bar the frame will take. Square and rectangular stock cut to the same figure.
Accessories
OptionalTick what you need and it goes on the quote. These are quoted by the workshop against your spec and carry no discount.
Your machine
Model code
CE-BS-LMSA-350
350 mm , Semi-automatic
No accessories selected
Quoted ex-works Rajkot. Electric motor, packing and forwarding, and GST are extra.
Added. 1 on the quote.
In the quote
- Double column frame and bow
- Hydraulic power pack
- Hydraulic clamping vice
- Coolant system
- Commissioning support
- All Electric motors
Charged separately
- Seaworthy packing and forwarding
- GST
- Extra accessories
Lead time
1 to 8 weeks As per model Selection
Category
Metal Cutting Bandsaw
Straight to the workshop
+91 9427259777 About the LMSA
The bow rides on two columns rather than pivoting on a hinge, so the blade stays square through a 2000 mm section instead of drifting. This is the frame for forging stock, heavy plate, and anything the hinge range cannot reach.
Specification
Frame Double column
Lifting Hydraulic, automatic
Clamping vice Hydraulic
Feeding Operator fed
Round capacity Dia 350 mm
Section capacity 350 x 350 mm
Same range
— P — 01.2
Step up for capacity, step down for footprint. Every one of these is the same workshop and the same warranty.
.YwQaCDGq_Z1HvAlJ.webp)
.B_cGzY33_1xeUMT.webp)
.BH1jtVTY_Z1Ti5lE.webp)
1/3
SA Hinge Type Semi-Automatic
Hydraulic lift and hydraulic vice on the same hinge frame.
- Capacity
- 200 to 400x600 mm
- Automation
- Semi-automatic
- Sizes
- 4 to configure
Configure
1/3
FAS Hinge Type Fully Automatic
Servo and ball screw feeding. Repeats to 0.1 mm.
- Capacity
- 200 to 350 mm
- Automation
- Fully automatic
- Sizes
- 3 to configure
Configure
LMFA Double Column Fully Automatic
The top of the range. Heavy section, unattended.
- Capacity
- 350 to 2000 mm
- Automation
- Fully automatic
- Sizes
- 7 to configure
Configure
Next step — 01
Tell us what you're cutting.
We'll suggest the machine.
Every enquiry is answered by someone who's actually built the machine. No sales scripts, no runaround. Response rate — 94%.