.CW7xESJW_ZelhNM.webp)
.1hEstgKE_ZeGjYT.webp)
.DlfISGdI_18nnXU.webp)
.CkNa3pj6_Z1eT6UD.webp)
1/4
SH Hinge Type Manual
The entry bandsaw. Lift and clamp by hand.
- Capacity
- 200 to 450 mm
- Automation
- Manual
- Sizes
- 4 to configure
Configure
The range
— P — 00 Every machine we make.
Five categories. Open one to filter it by capacity and automation, then configure the machine and send it to the workshop.
Category — P 01
Continuous-loop blade for cleaner cuts, tighter tolerances, and lower material loss. Five frames from a hand-clamped 200 mm to a 2000 mm double column.
.YwQaCDGq_Z1HvAlJ.webp)
.B_cGzY33_1xeUMT.webp)
.BH1jtVTY_Z1Ti5lE.webp)
1/3
SA Hinge Type Semi-Automatic
Hydraulic lift and hydraulic vice on the same hinge frame.
- Capacity
- 200 to 400x600 mm
- Automation
- Semi-automatic
- Sizes
- 4 to configure
Configure
1/3
FAS Hinge Type Fully Automatic
Servo and ball screw feeding. Repeats to 0.1 mm.
- Capacity
- 200 to 350 mm
- Automation
- Fully automatic
- Sizes
- 3 to configure
Configure
LMSA Double Column Semi-Automatic
Two columns instead of a hinge. Where the sections get heavy.
- Capacity
- 200 to 1000x300 mm
- Automation
- Semi-automatic
- Sizes
- 9 to configure
Configure
LMFA Double Column Fully Automatic
The top of the range. Heavy section, unattended.
- Capacity
- 350 to 2000 mm
- Automation
- Fully automatic
- Sizes
- 7 to configure
Configure
Category — P 02
Cold cutting for precise, burr-free finishes on tube, profile, and non-ferrous stock. High blade life, repeatable production runs.
1/2
60 mm Circular Saw
Burr-free cut-off for tube and profile.
- Capacity
- On spec
- Automation
- Manual
Configure
80 mm Circular Saw
The production cold saw. Three speeds, coolant fed.
- Capacity
- On spec
- Automation
- Manual
Configure
Category — P 03
Reciprocating-blade sawing for round bar, section, and structural stock. Seven models from a 75 mm bench machine to a 600 mm hydraulic.
1/3
CE-1 Power Hacksaw
The bench machine. 75 mm, manual throughout.
- Capacity
- 75 mm
- Automation
- Manual
Configure
.COrgPAQs_Z1xeJHU.webp)
.CmTnLe1U_2bEkvE.webp)
1/3
CE-2 Power Hacksaw
150 mm on a 14 inch blade. The workshop standard.
- Capacity
- 150 mm
- Automation
- Manual
Configure
1/4
1/7
CE-3 Power Hacksaw
First of the hydraulics. Automatic lift and reverse-stroke relief.
- Capacity
- 200 mm
- Automation
- Semi-automatic
Configure
.Dqz_YcjE_Z16LxsW.webp)
.B7gtT2dv_kEHms.webp)
.doxZZVpP_1MGNaS.webp)
1/3
CE-5 Power Hacksaw
250 mm hydraulic. The production hacksaw.
- Capacity
- 250 mm
- Automation
- Semi-automatic
Configure
1/4
CE-6 Power Hacksaw
400 mm. Heavy bar and forging stock.
- Capacity
- On spec
- Automation
- Semi-automatic
Configure
Category — P 04
Sawing solutions built to one customer's material, throughput, and tolerance targets. Designed, prototyped, and validated in-house.
Special Purpose Bandsaw
Built for Flexibility. Designed for Precision.
- Capacity
- On spec
- Automation
- Fully automatic
Configure
.XmXzdLbA_Z1DnmVL.webp)
1/2
Pedestal grinder
Built Tough. Grinds Strong. Lasts Longer.
- Capacity
- On spec
- Automation
- Consumable
Configure
Category — P 05
Bi-metal and carbon-steel blades welded, set, and stocked for our machine range and compatible third-party saws.
Bi-Metal M42 Bandsaw Blade
The general-purpose loop. Mild, alloy, and stainless.
- Capacity
- On spec
- Automation
- Consumable
Configure
Bi-Metal M51 Bandsaw Blade
Cobalt-rich edge for tool steel and high-alloy stock.
- Capacity
- On spec
- Automation
- Consumable
Configure
High speed Steel Hacksaw Blade
Straight blades for the CE hacksaw range.
- Capacity
- On spec
- Automation
- Consumable
Configure
Carbide-Tipped Circular saw Blade
For cast iron and hardened stock that eats bi-metal.
- Capacity
- On spec
- Automation
- Consumable
Configure
Next step — 01
Tell us what you're cutting.
We'll suggest the machine.
Every enquiry is answered by someone who's actually built the machine. No sales scripts, no runaround. Response rate — 94%.